Hello !
I need more info about N75 Control on Dta S series ecu my N75 is wired but how to control it ? i need configuration info for this and boost setting with 20*14 Map !
thanks
N75 Parameter !
N75 Parameter !
VR6T 3.0L PT6262,Schimel Intake , Msd coil pack, 02M 6 Spd , Spec Triple Disc , DTA S80 And more & more !
Re: N75 Parameter !
You would get better luck with this valve - http://www.efi-parts.co.uk/index.php?productID=222
I tried the N75 on my VR6 Turbo and couldn't get it to behave nicely.
Or an external boost controller like the IBC-R is very good.
I tried the N75 on my VR6 Turbo and couldn't get it to behave nicely.
Or an external boost controller like the IBC-R is very good.
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: N75 Parameter !
paco972 wrote:Hello !
I need more info about N75 Control on Dta S series ecu my N75 is wired but how to control it ? i need configuration info for this and boost setting with 20*14 Map !
thanks
Is this a serious question ?
There are 2 wires. 12v, and an ecu trigger. It really doesnt get much simpler
And you build your own 20x14 map by trial and error. There is NO other way, as there are far far too many variables.
Solenoid frequency will likely be around 20-30hz
- 86sixsix
- Posts: 139
- Joined: Fri Aug 05, 2011 8:01 am
- ECU Model: S40 Pro
- Distributor: http://www.dtafast.co.uk
- Firmware Version: 78.01
- Location: A cold garage / Sideways 'round cascades
- Contact:
Re: N75 Parameter !
^20hz is sweet as on a n75 j flavour
Renault 1.6 K7M, '92 Clio 16v shell, Rotrex C30-74, S40, Faceache, Sh***er, YouTube Blue Shed Channel