Page 1 of 1
N75 Parameter !
Posted: Fri Jan 20, 2012 12:12 am
by paco972
Hello !
I need more info about N75 Control on Dta S series ecu my N75 is wired but how to control it ? i need configuration info for this and boost setting with 20*14 Map !
thanks
Re: N75 Parameter !
Posted: Fri Jan 20, 2012 4:52 am
by VR6Turbo
You would get better luck with this valve -
http://www.efi-parts.co.uk/index.php?productID=222
I tried the N75 on my VR6 Turbo and couldn't get it to behave nicely.
Or an external boost controller like the IBC-R is very good.
Re: N75 Parameter !
Posted: Fri Jan 20, 2012 1:59 pm
by stevieturbo
paco972 wrote:Hello !
I need more info about N75 Control on Dta S series ecu my N75 is wired but how to control it ? i need configuration info for this and boost setting with 20*14 Map !
thanks
Is this a serious question ?
There are 2 wires. 12v, and an ecu trigger. It really doesnt get much simpler
And you build your own 20x14 map by trial and error. There is NO other way, as there are far far too many variables.
Solenoid frequency will likely be around 20-30hz
Re: N75 Parameter !
Posted: Tue Jan 24, 2012 10:58 am
by 86sixsix
^20hz is sweet as on a n75 j flavour