launch s80

Give input on tuning as well as any tips and tricks you may have. Also feel free to share base mapping files for various engine types.
Post Reply
jpr.racing07
Posts: 55
Joined: Sun Feb 12, 2012 5:11 am
ECU Model: P8 Pro

launch s80

Post by jpr.racing07 »

Hi I am after some base settings for launch something I can fine tune can anyone help I know every car / driver is different but any thing would help max torque @ 3500 480 ft pounds any ideas for settings
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: launch s80

Post by Rob Stevens »

Hi. Try something like this, the highlighted in red will be bespoke to your car, set the speed to turn off at your max speed for your start gear. Use the knob to set your launch rpm, I imagine you could get this down to 2000 rpm on your engine, but trial and error. I'm not sure if you use the gear controller or right lambda but configure as appropriate. 15% slip shouldn't be far off, just make sure you get all the gearing and circumferences right.
Attachments
Launch1.png
Post Reply