Target lambda not logging correctly?

Give input on tuning as well as any tips and tricks you may have. Also feel free to share base mapping files for various engine types.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Target lambda not logging correctly?

Post by Alex DTA »

As Rob says, Lambda Target is not turned on in the logging options in the log.

Also, you have a 120 second delay from start for closed loop, but neither of the logs are for that long. Try running the car for more than 2 minutes.
troy
Posts: 50
Joined: Wed Apr 04, 2012 12:40 am
ECU Model: S80 Pro
Firmware Version: 62

Re: Target lambda not logging correctly?

Post by troy »

Lambda target is turned on in the logging in the car, I just didn't have the very latest map on me without going out to the car. Lesson learned there.

But I think you're right on the 2 minute thing, will give it another go tonight.

While we're here, would it be possible to add another data stream option to the rs232 output? RC2 output for racechrono.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Target lambda not logging correctly?

Post by Alex DTA »

I'll add the RC2 output to the very long enhancements list.
Post Reply