Hi guys and girls.
My injectors are on the limit, so I'm going to put some larger ones in.
So, regarding the fuel map, say the injectors are 20% larger, do I just knock 20% off the ms to get it roughly there?
Cheers
Injector Size v Fuel Map ms
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Injector Size v Fuel Map ms
Cheers buddy
Re: Injector Size v Fuel Map ms
So if my old injectors are 349cc and the new ones are 511cc, do I use the percentage increase or decrease? Doh
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Injector Size v Fuel Map ms
Obviously you need to decrease the numbers in the fuel table.
Re: Injector Size v Fuel Map ms
Decrease by 46%
Re: Injector Size v Fuel Map ms
yeah I know i need to decrease the ms, but I was asking if I used the increase or decrease percentage figure, as they are different lol
Katana, thanks for the reply
Katana, thanks for the reply
Re: Injector Size v Fuel Map ms
as 349 to 511 is 46%
But 511 to 349 is 31%
But 511 to 349 is 31%
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Injector Size v Fuel Map ms
Try them and see which gives you the end number you want ! Best way to learn.
Nothing is permanent until you decide to make it permanent...and even then it still isnt permanent lol
Nothing is permanent until you decide to make it permanent...and even then it still isnt permanent lol
Re: Injector Size v Fuel Map ms
lol, thats a good way to look at it dude ha ha
I'm crap at percentages, apart from VAT ha ha
I'm crap at percentages, apart from VAT ha ha