e48 not allowed flashing
e48 not allowed flashing
hello to all , i need your help, i have to programm an e48 used ecu , the ecu is allready programme for an other car (saxo vts) i have to fit on a alfa romeo 33 . the problem is that the ecu ask me a pin code , i try to download the maps from it and this is done !!!! i can not flash to it other maps, i look at the left bottom and red bar says that (unlock map and its cound 1-12000 and more )the cell on the upper bars is locked !!! can any help me ??
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: e48 not allowed flashing
viewtopic.php?f=8&t=385&hilit=phazer
viewtopic.php?f=5&t=14&hilit=phazer
I think there was mention of a universal code for the older ecu's too.
viewtopic.php?f=5&t=14&hilit=phazer
I think there was mention of a universal code for the older ecu's too.
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: e48 not allowed flashing
Also see here: viewtopic.php?f=8&t=865