Page 1 of 2

ALS/Turbo funcion

Posted: Mon Jan 08, 2018 11:39 am
by rocar
Is it normal that if Turbo function is on , engine stalls as soon ALS button is pressed

Re: ALS/Turbo funcion

Posted: Mon Jan 08, 2018 11:51 am
by Alex DTA
No, it usually means the ALS/MAP2 functions haven't been set properly.
Check all the map 2 values.

Re: ALS/Turbo funcion

Posted: Thu Jan 11, 2018 12:31 pm
by rocar
Image

Re: ALS/Turbo funcion

Posted: Thu Jan 11, 2018 1:18 pm
by Rob Stevens
Have you actually got the fuel and ignition maps filled in? like Alex suggests.

Re: ALS/Turbo funcion

Posted: Thu Jan 11, 2018 2:06 pm
by rocar
Yes Of course copy of main maps to test

Re: ALS/Turbo funcion

Posted: Thu Jan 11, 2018 2:57 pm
by Rob Stevens
Ok, so I need to try and drag the rest of the info out then :)
You have valve fitted?
If so I suspect that the engine is going masivally weak as soon as you activate and stalling?
Try setting the minimum rpm to 2000 or something and changing the always active check box. Also change the ALS time to 10 sec or something

Re: ALS/Turbo funcion

Posted: Fri Jan 12, 2018 1:01 am
by rocar
No valve, it stalls as if you turn off ignition.I saw this on an other ecu too.If Turbo function turned off ALS works perfect.
I need Turbo Function only of the over boost limit

Re: ALS/Turbo funcion

Posted: Fri Jan 12, 2018 3:57 am
by Alex DTA
Email me a copy of the map, and I'll test it next week.

Re: ALS/Turbo funcion

Posted: Fri Jan 12, 2018 10:02 am
by rocar
I will try to send you a map no problem,I have maps on other PC at work

Thanks

Re: ALS/Turbo funcion

Posted: Mon Jan 15, 2018 12:36 am
by rocar
Alex
Map sent