e48 35 pounds of boost

Give input on tuning as well as any tips and tricks you may have. Also feel free to share base mapping files for various engine types.
Post Reply
wezze93
Posts: 2
Joined: Thu Sep 29, 2011 12:17 am

e48 35 pounds of boost

Post by wezze93 »

How can u set up the e48 to handle 35 pounds of boost .how do I need to set my pressure compersion
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: e48 35 pounds of boost

Post by stevieturbo »

I would imagine it's just a case of using a suitable map sensor. No idea how flexible the E48 is in that respect though.

Can the E48 even do MAP as main load ?
wezze93
Posts: 2
Joined: Thu Sep 29, 2011 12:17 am

Re: e48 35 pounds of boost

Post by wezze93 »

What map sensor do I need
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: e48 35 pounds of boost

Post by Rob Stevens »

E48 will be fine, you will need 4bar map sensor. however you will need to check that your version can support map as load, if that's what you want to do? Some early versions may not, if you connect with the later software for the p8 and e48 and look in the throttle columns section you may or may not get the option.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: e48 35 pounds of boost

Post by stevieturbo »

Although I do fear, that if you need to ask such a question......something is going to end badly.
Jon K
Posts: 602
Joined: Fri Dec 04, 2009 1:45 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73
Location: Pennsylvania, USA
Contact:

Re: e48 35 pounds of boost

Post by Jon K »

Stevie what could go wrong at 2.4 bar lol
1992 700RWHP Pump Gas BMW
Image
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: e48 35 pounds of boost

Post by stevieturbo »

In fact...having re-read the question....yup, it's gona end badly.

I thought he did actually just ask about a map sensor. Nope....he thinks you can just enter values in the compensation tables !!!!!
User avatar
ignitionautosport
Posts: 577
Joined: Wed Jul 27, 2011 5:30 am
ECU Model: S80 Pro
Location: New Zealand
Contact:

Re: e48 35 pounds of boost

Post by ignitionautosport »

From memory the manual says to enter values in the compensation map before tuning with TPS as main load. SO I think a full re-tune would be a good idea so you know where you stand.

It still doesn't mean the engine will live.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
Post Reply