Hello everyone, I need help to configure twin injectors of a vw 2.0 16v engine for racing, I understand very little or nothing to program ECU S80 Pro, my injectors are 249cc.
I need your help
Configure twin injector
-
- Posts: 3577
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Configure twin injector
You have 8 outputs, so wire each injector to an output.
Then turn on Twin Injectors in Essential Map Settings. Use the 20x14 blend map.
Then blend the injectors as you need to.
Then turn on Twin Injectors in Essential Map Settings. Use the 20x14 blend map.
Then blend the injectors as you need to.
-
- Posts: 5
- Joined: Wed Dec 04, 2019 7:04 am
- ECU Model: S80 Pro
- Distributor: jontec
- Firmware Version: 73.01
Re: Configure twin injector
Good afternoon, I think I explained badly, the injectors (8) are already running on the engine, what I need is a correct table.
-
- Posts: 5
- Joined: Wed Dec 04, 2019 7:04 am
- ECU Model: S80 Pro
- Distributor: jontec
- Firmware Version: 73.01
Re: Configure twin injector
Second Injector Blend Edit % Miguel
Throttle % 0 3 6 10 16 22 29 38 47 57 66 76 85 95
750 0 3 7 15 20 35 45 60 70 80 90 100 100 100
1000 0 3 7 15 20 35 45 60 70 80 90 100 100 100
1200 0 3 7 15 20 35 45 60 70 80 90 100 100 100
1500 0 3 7 15 20 35 45 60 70 80 90 100 100 100
2000 0 3 7 15 20 35 45 60 70 80 90 100 100 100
2500 0 3 7 15 20 35 45 60 70 80 90 100 100 100
3000 0 3 7 15 20 35 45 60 70 80 90 100 100 100
3500 0 3 7 15 20 35 45 60 70 80 90 100 100 100
4000 0 3 7 15 20 35 45 60 70 80 90 100 100 100
4500 3 3 7 15 20 35 45 60 70 80 90 100 100 100
4900 5 5 7 15 20 35 45 60 70 80 90 100 100 100
5300 10 10 7 15 20 35 45 60 70 80 90 100 100 100
5700 10 10 7 15 20 35 45 60 70 80 90 100 100 100
6100 10 10 7 15 20 35 45 60 70 80 90 100 100 100
6500 10 10 7 15 20 35 45 60 70 80 90 100 100 100
6900 10 10 7 15 20 35 45 60 70 80 90 100 100 100
7300 10 10 7 15 20 35 45 60 70 80 90 100 100 100
7700 10 10 7 15 20 35 45 60 70 80 90 100 100 100
8100 10 10 7 15 20 35 45 60 70 80 90 100 100 100
8500 10 10 7 15 20 35 45 60 70 80 90 100 100 100
Throttle % 0 3 6 10 16 22 29 38 47 57 66 76 85 95
750 0 3 7 15 20 35 45 60 70 80 90 100 100 100
1000 0 3 7 15 20 35 45 60 70 80 90 100 100 100
1200 0 3 7 15 20 35 45 60 70 80 90 100 100 100
1500 0 3 7 15 20 35 45 60 70 80 90 100 100 100
2000 0 3 7 15 20 35 45 60 70 80 90 100 100 100
2500 0 3 7 15 20 35 45 60 70 80 90 100 100 100
3000 0 3 7 15 20 35 45 60 70 80 90 100 100 100
3500 0 3 7 15 20 35 45 60 70 80 90 100 100 100
4000 0 3 7 15 20 35 45 60 70 80 90 100 100 100
4500 3 3 7 15 20 35 45 60 70 80 90 100 100 100
4900 5 5 7 15 20 35 45 60 70 80 90 100 100 100
5300 10 10 7 15 20 35 45 60 70 80 90 100 100 100
5700 10 10 7 15 20 35 45 60 70 80 90 100 100 100
6100 10 10 7 15 20 35 45 60 70 80 90 100 100 100
6500 10 10 7 15 20 35 45 60 70 80 90 100 100 100
6900 10 10 7 15 20 35 45 60 70 80 90 100 100 100
7300 10 10 7 15 20 35 45 60 70 80 90 100 100 100
7700 10 10 7 15 20 35 45 60 70 80 90 100 100 100
8100 10 10 7 15 20 35 45 60 70 80 90 100 100 100
8500 10 10 7 15 20 35 45 60 70 80 90 100 100 100
-
- Posts: 1247
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Configure twin injector
Nothing wrong with that, other than at low rpm I wouldn't use the secondary. However you need really need to find what the engine likes on the dyno. I would add that some people always let 5% through lower set to keep the fuel flowing and ready. I feel that your dead times should be accurate also as you have twice as many
-
- Posts: 1247
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Configure twin injector
Also, not worth having secondararrys on until 75% throttle as you not looking for the benefit yet
-
- Posts: 5
- Joined: Wed Dec 04, 2019 7:04 am
- ECU Model: S80 Pro
- Distributor: jontec
- Firmware Version: 73.01
Re: Configure twin injector
Hi Rob, from the little that I understand, from 76% to 95% of the throttle external injectors are used.
Wouldn't injectors1 and injectors2 be better for getting more CV?
Wouldn't injectors1 and injectors2 be better for getting more CV?
-
- Posts: 1247
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Configure twin injector
CV ?
You need to test on the dyno really as you are only looking for small gains
You need to test on the dyno really as you are only looking for small gains