Changing from TPS to MAP as load

Give input on tuning as well as any tips and tricks you may have. Also feel free to share base mapping files for various engine types.
Post Reply
c2turbo
Posts: 44
Joined: Mon Dec 26, 2011 11:26 pm
ECU Model: S80 Pro
Firmware Version: 89

Changing from TPS to MAP as load

Post by c2turbo »

Is there an easy way to convert from TPS to MAP as load without having to remap the car from scratch? I have a turbo car that was tuned with TPS and preasure compensation and would like to set the car up to use MAP as load.


Thanks David
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Changing from TPS to MAP as load

Post by Rob Stevens »

If you logged pulse width with MAP vs RPM would get you close
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Changing from TPS to MAP as load

Post by stevieturbo »

Just datalog as Rob says and build your own table from MAP vs RPM. MLV HD offers a table builder too which could be of use too.
c2turbo
Posts: 44
Joined: Mon Dec 26, 2011 11:26 pm
ECU Model: S80 Pro
Firmware Version: 89

Re: Changing from TPS to MAP as load

Post by c2turbo »

Steve I am not familiar with MLV HD. the DTA Data logger is not as giving as most I have used Haltec , AEM , Motec , Vipec , Link. it seems very basic unless I am missing something ?

Thanks David
c2turbo
Posts: 44
Joined: Mon Dec 26, 2011 11:26 pm
ECU Model: S80 Pro
Firmware Version: 89

Re: Changing from TPS to MAP as load

Post by c2turbo »

Never mind Mega log viewer lol, got it
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Changing from TPS to MAP as load

Post by stevieturbo »

Post Reply