Hi all just a quick one
In comp Baro settings it in % for timing For eg in my main ing table if i have 30 degrees on full load at 27 psi and at 27 psi in baro it says -3 is that - 3% of 30 degrees at 27 psi so 27 degrees advance?
Thanks
Comp Baro
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Comp Baro
Depends on how you have this set. you can either remove (or add) a % or a figure as in this example. if you want to remove 3 deg at 27 psi type -3 in that row.
In your example you will be removing 3% , just 0.9 degrees
In your example you will be removing 3% , just 0.9 degrees