Comp Baro

Give input on tuning as well as any tips and tricks you may have. Also feel free to share base mapping files for various engine types.
Post Reply
Turbokart
Posts: 13
Joined: Thu Jul 25, 2019 12:42 am
ECU Model: S60 Pro

Comp Baro

Post by Turbokart »

Hi all just a quick one
In comp Baro settings it in % for timing For eg in my main ing table if i have 30 degrees on full load at 27 psi and at 27 psi in baro it says -3 is that - 3% of 30 degrees at 27 psi so 27 degrees advance?
Thanks
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Comp Baro

Post by Rob Stevens »

Depends on how you have this set. you can either remove (or add) a % or a figure as in this example. if you want to remove 3 deg at 27 psi type -3 in that row.
In your example you will be removing 3% , just 0.9 degrees
Attachments
Annotation 2020-08-30 083719.png
Post Reply