Re: Help needed on ignition problem
Posted: Mon Aug 13, 2012 4:48 am
Problem solved.
After getting good advice from Rick at Zomer motorsport I changed the faulty coils and the ignition setting to Twin Spark instead of "Coil on Plug".
This is running the engine in wasted spark batch mode until I have a "clean" enough CAM signal to put it to full sequential.
And I was always thinking Twin Spark was for engines with 2 spark plugs per cilinder......until I read this in the latest manual ; >>This ability to run twin spark mode can be very useful for an engine which has individual coils but no cam sensor. Wire the coils as you would for running them with a cam sensor fitted and select twin spark on.<<
Ahhh....
After getting good advice from Rick at Zomer motorsport I changed the faulty coils and the ignition setting to Twin Spark instead of "Coil on Plug".
This is running the engine in wasted spark batch mode until I have a "clean" enough CAM signal to put it to full sequential.
And I was always thinking Twin Spark was for engines with 2 spark plugs per cilinder......until I read this in the latest manual ; >>This ability to run twin spark mode can be very useful for an engine which has individual coils but no cam sensor. Wire the coils as you would for running them with a cam sensor fitted and select twin spark on.<<
Ahhh....