best method for changing column and row values

Give input on tuning as well as any tips and tricks you may have. Also feel free to share base mapping files for various engine types.
Post Reply
omegaman
Posts: 115
Joined: Mon Oct 05, 2015 12:48 pm
ECU Model: S80 Pro

best method for changing column and row values

Post by omegaman »

I have a pretty good map for my car now but would like to add more resolution in the lower RPM/TPS areas of the fuel table. Is there a recommended method for doing this?

My tables have 3 rows of RPM values above my limit 8000,8500,8750 and 8800.....I'd like to shift the whole lot down and have the final row as 7600 RPM.

With the TPS I have 0,4,7,11,16,22,29,38 etc......Id like to have the lower area as 0,2,4,8,10,15 etc. The only way I can see to do this is to print my current table, change the Column and Row values and then fill in the cells manually.

Is there way to export tables like you can in MS?

Thanks
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: best method for changing column and row values

Post by Alex DTA »

Just open two copies of DTASwin, and then you can copy from one to the other.
omegaman
Posts: 115
Joined: Mon Oct 05, 2015 12:48 pm
ECU Model: S80 Pro

Re: best method for changing column and row values

Post by omegaman »

Ahhh great idea.....thanks Alex.
Post Reply