Injector Angle on Dyno Knobs

Give input on tuning as well as any tips and tricks you may have. Also feel free to share base mapping files for various engine types.
Post Reply
boni
Posts: 8
Joined: Thu Jul 05, 2012 10:47 am
ECU Model: No ECU

Injector Angle on Dyno Knobs

Post by boni »

Is it possible to control the Injector angle on the Dyno Knobs instead of the usual ignition and target lambda?

Ideally I would like to set target lambda with a fixed injection angle, then review the map with ignition and injection angle being controlled.

cheers,

Marc
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Injector Angle on Dyno Knobs

Post by Rob Stevens »

Yes this is available in Real Time Mapping/Control Box Controls/Injector Angle On Left Knob
boni
Posts: 8
Joined: Thu Jul 05, 2012 10:47 am
ECU Model: No ECU

Re: Injector Angle on Dyno Knobs

Post by boni »

brilliant, thanks for that.

Working offline I dont seem to be able to access the injection timing map, it is grayed out, is this because I am working offline, or is it a function not accessible with an S40?
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Injector Angle on Dyno Knobs

Post by stevieturbo »

S40 cannot do sequential, so you would have no ability to control the injection timing.
Post Reply