hello! I am wondering how (if possible) can I set up my S60 to run my VR6 semi sequential injection. I have the cam sensor wired but I am not sure how I would setup the table? Can anyone help.
Heres a video of the car on the rollers
[youtube][/youtube]
Can I run semi sequential?
Re: Can I run semi sequential?
I think if you switch on 'Two Stroke' mode this will fire the injectors every revolution as opposed to every other as normal sequential - or do you mean something completely different?
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Can I run semi sequential?
Surely if you have a cam sensor fitted, you would want to run fully sequential ?
Otherwise, why bother ?
Otherwise, why bother ?
- ignitionautosport
- Posts: 577
- Joined: Wed Jul 27, 2011 5:30 am
- ECU Model: S80 Pro
- Location: New Zealand
- Contact:
Re: Can I run semi sequential?
I am assuming because an S60 doesn't have 6 injector drivers, stevieturbo.
Re: Can I run semi sequential?
correct, s60 only has 4 igniton/injector drivers, so I am running two cylinders per driverignitionautosport wrote:I am assuming because an S60 doesn't have 6 injector drivers, stevieturbo.
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Can I run semi sequential?
ignitionautosport wrote:I am assuming because an S60 doesn't have 6 injector drivers, stevieturbo.
That's a very good reason ! lol
Not a lot of benefit using a cam sensor then.
Next question...what does one define "semi-sequential" as ?
-
- Posts: 318
- Joined: Tue Aug 09, 2011 2:54 pm
- ECU Model: S80 Pro
- Distributor: Roverdose
- Location: Stevenage
- Contact:
Re: Can I run semi sequential?
cylinders paired on the opposite stroke
1342 4pot = 1+4, 2+3
165432 6pot = 1+4, 6+3, 5+2 (my one anyway!)
etc, imo.
Drew
1342 4pot = 1+4, 2+3
165432 6pot = 1+4, 6+3, 5+2 (my one anyway!)
etc, imo.
Drew
- ignitionautosport
- Posts: 577
- Joined: Wed Jul 27, 2011 5:30 am
- ECU Model: S80 Pro
- Location: New Zealand
- Contact:
Re: Can I run semi sequential?
yep, so if same as above wireRoverdose wrote: 165432 6pot = 1+4, 6+3, 5+2 (my one anyway!)
- Inj1 -> 1+4
- Inj2 -> 6+3
- Inj3 -> 5+2
Go into Sequential Injection settings and put in the Injector Offsets:
- Inj1 = 0 (should be this by default)
- Inj2 = 240
- Inj3 = 480
Re: Can I run semi sequential?
Awesome, I will try this. Thank you for the help guys!
- ignitionautosport
- Posts: 577
- Joined: Wed Jul 27, 2011 5:30 am
- ECU Model: S80 Pro
- Location: New Zealand
- Contact:
Re: Can I run semi sequential?
Of course, adjust to suit your firing order.
Have fun
Have fun