air temps

Give input on tuning as well as any tips and tricks you may have. Also feel free to share base mapping files for various engine types.
Post Reply
ESRA Carperformance
Posts: 29
Joined: Thu Mar 13, 2014 6:56 am
ECU Model: P8 Pro

air temps

Post by ESRA Carperformance »

what should i expect to see on a turbo engine?

I got 69 AIT.. with the sensor scew it to the inlet manifold
Attachments
Dta data.jpg
stevieturbo
Posts: 3586
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: air temps

Post by stevieturbo »

The pic doesnt work.

And you should expect a realistic temperature. A single number is meaningless. Either describe operating conditions that number relates to or upload a datalog
Rob Stevens
Posts: 1250
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: air temps

Post by Rob Stevens »

If that's 69deg C I'm thinking this is around .7bar with no intercooler and sounds about right. But you would do well to reduce this with a big intercooler. the P8 has a logger internal and you should be able to see when this occurs, in diagnostic display you will only see the max, not when it occurs.
ESRA Carperformance
Posts: 29
Joined: Thu Mar 13, 2014 6:56 am
ECU Model: P8 Pro

Re: air temps

Post by ESRA Carperformance »

It's my Time Attack toyota Corolla with a 3sgte.
Running about .9 bar with a smal fmic.

I will reset it all and take her for a spin.
ESRA Carperformance
Posts: 29
Joined: Thu Mar 13, 2014 6:56 am
ECU Model: P8 Pro

Re: air temps

Post by ESRA Carperformance »

I did some more datalogs,

And its all good.
Temp go down when i start to drive..

At full throtle and with .8 bar boost the AIT is 35 degrees :)
Post Reply