DTASwin rewrite

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
iceman_n
Posts: 141
Joined: Mon Jan 16, 2012 1:39 pm
ECU Model: S40 Pro
Firmware Version: 58

Re: DTASwin rewrite

Post by iceman_n »

maybe you can make the crosshair to become green highlight when its on the center of the box
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: DTASwin rewrite

Post by Alex DTA »

It's a bit hard to see:
Image

Updated the thickness of the cross hairs:
Image
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: DTASwin rewrite

Post by Rob Stevens »

Being fussy here but the cross hair now obscures the number ;) could the cross hairs not-go into the active cell perhaps? I know you get the number in the other window however.
Like Alex hasn't got enough to do.

Like prevent oil shut down on HIGH oil pressure ! unless this is fixed now?
iceman_n
Posts: 141
Joined: Mon Jan 16, 2012 1:39 pm
ECU Model: S40 Pro
Firmware Version: 58

Re: DTASwin rewrite

Post by iceman_n »

i like the thin green one, maybe you can add the thickness as and option or make a box at the center of the crosshair so the number will be visivle easily and also the box under the crosshair will used as a guide to center the crosshair box
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: DTASwin rewrite

Post by Alex DTA »

Rob Stevens wrote:Being fussy here but the cross hair now obscures the number ;) could the cross hairs not-go into the active cell perhaps? I know you get the number in the other window however.
That right there is the problem. If it's big enough to be easily visible, it obscures the number. It's why I used the thinner one to start.
There are many ways to skin a cat, it's a matter of spending the time on it.
Rob Stevens wrote:Like prevent oil shut down on HIGH oil pressure ! unless this is fixed now?
Really? Will test that.
Rob Stevens wrote:Like Alex hasn't got enough to do.
I've heard some people stop work and sleep. I might even have done that once. I think.
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: DTASwin rewrite

Post by katana »

Alex DTA wrote:I've heard some people stop work and sleep. I might even have done that once. I think.
Nah - you were obviously Day-dreaming again!
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: DTASwin rewrite

Post by Alex DTA »

I'm not convinced by the light green, but lets see what other feedback we get.

Image
iceman_n
Posts: 141
Joined: Mon Jan 16, 2012 1:39 pm
ECU Model: S40 Pro
Firmware Version: 58

Re: DTASwin rewrite

Post by iceman_n »

so now the crosshair is below the box so the numbers would be visible...
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: DTASwin rewrite

Post by Alex DTA »

No, I've just not centered it in that image. The lines don't go over the current cell that is marked in grey as normal.
PhillipM
Posts: 177
Joined: Tue May 13, 2014 5:30 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73

Re: DTASwin rewrite

Post by PhillipM »

Don't know if it's been mentioned already but "manipulate mathmatically" (F5) doesn't work for single cells any more for some reason.
Post Reply