Windows xp

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Post Reply
Cygnus
Posts: 3
Joined: Sun Mar 10, 2019 1:38 pm
ECU Model: S60 Pro
Firmware Version: 89

Windows xp

Post by Cygnus »

Hi all, I’ve been trying to update the pc software on my old xp laptop but even though it says it’s the latest version (s60 version 89) the screen still shows the same old layout as before and doesn’t have the throttle blip setup that I need.
I’ve made sure I downloaded the xp version and even tried the windows 10 one just in case.
Any ideas what I could be doing wrong.
Cheers.
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Windows xp

Post by Rob Stevens »

I think you have an XP version and other. Make sure you use the XP version?
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Windows xp

Post by Alex DTA »

Are you connected to the S60?

Please take a screenshot of the software with the shift cut screen open. I need to see the whole screen, so use Print Screen.
You can email it to us if you don't want to upload it here.
Cygnus
Posts: 3
Joined: Sun Mar 10, 2019 1:38 pm
ECU Model: S60 Pro
Firmware Version: 89

Re: Windows xp

Post by Cygnus »

Not connected at the moment. I’ve taken a pic of the screen.
Attachments
DE718EBE-CA37-4827-A8C2-AC7060F044A3.jpeg
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Windows xp

Post by Alex DTA »

DE718EBE-CA37-4827-A8C2-AC7060F044A3.jpeg
Cygnus
Posts: 3
Joined: Sun Mar 10, 2019 1:38 pm
ECU Model: S60 Pro
Firmware Version: 89

Re: Windows xp

Post by Cygnus »

Ahh, I see now, I was comparing the screen to the one on my windows 10 pc.
Cheers Alex.
Post Reply