sparrow wrote:When you plug the cable in, do you get a notification asking if you want to open the dashboard by default? There are normally 2 notifications.
Is the micro USB converter an OTG cable? I don't know if it makes a difference, but I noticed bollah's is, and I remember mine is too
What USB cable are you using? FTDI or Prolific?
Is the cable plugged in to the ECU, and the ECU powered up?
No notification when I plug the cable in......just the message that I have plugged the usb cable in.
no idea what the micro USB adapter is, I dont know what an OTG is?
Again no idea what an FTDI or prolific cable is but the USB has always worked when plugged into my laptop. Its not a cheap ebay one either I bought it from RS Components.
cable is plugged into the ECU and fired up. I had to plug it into the laptop to do the header do da thing.
sparrow wrote:I doubt they don't support it, more like a setting somewhere. I'll see if I can borrow one next week. I have a S3 Mmini in the office I can test too.
rover200turbo wrote:Works just fine on my galaxy s5 although gps speed doesn't
John
When you say speed doesn't work, do you mean the speed doesn't register?
I noticed today when I looked at mine that the calibration is missing. I'll fix that this week.
sparrow wrote:I doubt they don't support it, more like a setting somewhere. I'll see if I can borrow one next week. I have a S3 Mmini in the office I can test too.
What version of Android are you on?
I'm running 4.2.2
OK. I've got a Tab3 to try tomorrow, I'll let you know if I find anything.