DTASwin rewrite

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
User avatar
ignitionautosport
Posts: 577
Joined: Wed Jul 27, 2011 5:30 am
ECU Model: S80 Pro
Location: New Zealand
Contact:

Re: DTASwin rewrite

Post by ignitionautosport »

It is. That with different colours for tuned and stored maybe, per currently. Or actually, toggle as you say will work, to see spread and also the tuned cells.
I like it.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
Jon K
Posts: 602
Joined: Fri Dec 04, 2009 1:45 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73
Location: Pennsylvania, USA
Contact:

Re: DTASwin rewrite

Post by Jon K »

Alex DTA wrote:Progressing, although slower than I'd like. However, it's now a complete rewrite from the ground up, so it's going to take a while. There is 20 odd years of code to go through!

Anyway, sneak peak of the sort of thing we're doing. No where near finished, but I figured you'd like to see roughly where we're headed.
Screenshot.png
Looks AWESOME and MODERN!

LOL - but seriously, super excited.
1992 700RWHP Pump Gas BMW
Image
RobScott
Posts: 23
Joined: Tue Jul 14, 2015 3:07 pm
ECU Model: S80 Pro
Distributor: martin fox

Re: DTASwin rewrite

Post by RobScott »

RE the colours.

Loving it! makes it much easier to spot any randomness floating about :D
Jon K
Posts: 602
Joined: Fri Dec 04, 2009 1:45 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73
Location: Pennsylvania, USA
Contact:

Re: DTASwin rewrite

Post by Jon K »

Moar teasers!
1992 700RWHP Pump Gas BMW
Image
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: DTASwin rewrite

Post by Alex DTA »

Your wish is my command. Well, it is when I can do it easily!! :lol:

The graph is added, and mostly working.
Better colours.png
I tried to make the table colours match the graph. That didn't go so well.
Bad Colours.png
:shock: :shock:

The graph can be rotated on either axis using the sliders.
Rotate.png
Single points can be grabbed and dragged up and down:
Single Point.png
Multiple points can be selected:
Multi Point Select.png
And dragged:
Multi Point Drag.png
It will be possible to interpolate on the graph as well, using the same selection.
When points are dragged/interpolated, the table automatically update.

That should keep you all going for a bit! ;)
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: DTASwin rewrite

Post by stevieturbo »

easy interpolation of one row, one column or multiple columns, any number of selected cells in either x or y plane is very helpful.

Only being able to do a single row at a time on the old software was a little annoying.

Likewise no ability to simply highlight/select cells and perform +/- functions on the block of cells ( or indeed any other maths function. ( yes I know F5 and all that but it was a slower process than it could/should be )
Jon K
Posts: 602
Joined: Fri Dec 04, 2009 1:45 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73
Location: Pennsylvania, USA
Contact:

Re: DTASwin rewrite

Post by Jon K »

Awesome! Looks great - I used to adjust the table on MS using the graph when autotune would leave a flat spot. Anxious for that again. One other thing that is problematic for me - the corrections function of DTA only applies to MAP1. I run out of MAP2 based on the logic of my "failsafe" mechanism in Aquamist controller. So, I have to constantly apply corrects to MAP1 then move MAP1 to MAP2 figures, and then restore MAP1. Ugh!
1992 700RWHP Pump Gas BMW
Image
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: DTASwin rewrite

Post by stevieturbo »

Yep, any correction tables should apply to the map currently in use...or have 2 separate correction tables relevant to each map
rxboxster
Posts: 42
Joined: Tue Nov 17, 2015 3:17 am
ECU Model: S80 Pro

Re: DTASwin rewrite

Post by rxboxster »

Wow, yeah looking good there alex! :D makes it soooo much easier to rear at a glance.

yeah selecting multiple cells and being able to Alt up and down would be seriously handy!
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: DTASwin rewrite

Post by Alex DTA »

Glad it's being well received.

Jon, noted. I'll add that to the to do list.

I've had a couple of queries about the mapping functionality. That will not change, and will continue to work as it currently does. The rewrite is to bring the code in to a newer platform, and add visual improvements, and hopefully remove small niggles.
One of the best features of the current software is it's usability, and I'm going to make sure that stays the same.
Post Reply