Hello,
I bought a car with a S60, his firmware version is V73.0 and the hardware is V6.00.
I use DTASwin 89.04, the menu "Other Map Settings" => "Launch,Shift Cut and Paddle Shift" the "Shift Cut" is greyed when I am connected to the ECU.(The menu is OK when I am in offline mode)
See my screenshot (offline mode)
I do not found an old version of DTASwin.
I am afraid to do an update of my firmware, it is a big jump.
What do you think ?
I would like to save my map with an old version of DTASwin, I don't know if the memories emplacement have been changed between the versions.
Best Regards
Update Firmware on S60
-
- Posts: 8
- Joined: Wed Mar 27, 2019 7:10 am
- ECU Model: S60 Pro
- Firmware Version: 73.00
- Location: France
Re: Update Firmware on S60
Thanks, I will try tonight.
Do you think, I can try to update my firmware after backup my map ?
Best Regards
Do you think, I can try to update my firmware after backup my map ?
Best Regards
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Update Firmware on S60
Yes. It's not as scary as people make out.
-
- Posts: 8
- Joined: Wed Mar 27, 2019 7:10 am
- ECU Model: S60 Pro
- Firmware Version: 73.00
- Location: France
Re: Update Firmware on S60
Hello, Alex, with the old version of DTASwin, I saw the correct values.
I know how to upgrade a firmware (I do in my job) but you know when a system works it is always dangerous to upgrade it
I don't know if the values in the flash memory are exactly in the same place in the new firmware, I saw that in the new DTASwin some pages have changed.
I will try after my next track day.
Thanks for your support.
I know how to upgrade a firmware (I do in my job) but you know when a system works it is always dangerous to upgrade it
I don't know if the values in the flash memory are exactly in the same place in the new firmware, I saw that in the new DTASwin some pages have changed.
I will try after my next track day.
Thanks for your support.