Hi
Is possible to add more main MAP columns in next firmware update ?
Now we have only 14 space,for TPS this is ok but for engine with target boost 3.0 bar or more this is to low MAP column space for correct mapping.
20 columns for map sounds nice if is possible.
Thanks
New firmware
-
- Posts: 1
- Joined: Sat Apr 30, 2016 4:15 pm
- ECU Model: No ECU
- Distributor: SM chip tuning
- Firmware Version: 99
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: New firmware
Hi Srdjan
That's not something we're going to do with the current range of ECUs. We'll look at that when we develop the range.
That's not something we're going to do with the current range of ECUs. We'll look at that when we develop the range.
-
- Posts: 1247
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: New firmware
MAP columns mostly look like a straight line so not sure why you need more resolution? Yet more unnecessary boxes to fill out seems a bit pointless, but perhaps that's just me
-
- Posts: 3577
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: New firmware
Because running an engine that sees 3 bar of boost...having huge steps to squeeze all of that in really does leave poor resolution. Usually it's the MS guys defending poor resolutionRob Stevens wrote:MAP columns mostly look like a straight line so not sure why you need more resolution? Yet more unnecessary boxes to fill out seems a bit pointless, but perhaps that's just me
And interpolation can only go so far. As I say to the MS guys who think a low numbers of map cells is fine....then why not just have half a dozen rows ?
If interpolation gets the map perfect everywhere...we would need hardly any rows or columns.
The reality is just far from that.