not transferred succesfully, please train again

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Anders_Karlsson
Posts: 116
Joined: Sat Jul 21, 2012 6:13 am
ECU Model: S80 Pro
Firmware Version: 66
Location: Sweden

Re: not transferred succesfully, please train again

Post by Anders_Karlsson »

This is the reason why i have bought laptops with 9 pin RS232-ports. Never had any communication errors with DTA, and i built my own 15 pin to 9 pin cables and knobs-box.

Its getting a bit hard to find laptops with 9 pin ports, the one i have now is a Fujitsu Lifebook E554 with SSD-harddrive.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: not transferred succesfully, please train again

Post by stevieturbo »

There are always second hand laptops available though, and can be handy to dedicated one for car stuff.


Although when I used DTA, I had good luck with PCMCIA adapters, and the Keyspan USA-19HSUSB to serial.

Strangely though the one I used the longest was the cheapest ! No idea what brand it was, just it was green and said HL-340 on it, looked like this, and it was dirt cheap.



eg



Whether it will work for every other laptop etc I dont know, but it worked for me.
Post Reply