Hello Alex
I think i found another bug.
If you open for example the fuel map, and you maximize it, you don't have a button to bring it back to a small window Also, if you've maximized your window, and you go to graph view, there is no way to go back to the grid view
Another thing that i think that would be an improvement is you don't have to go with the mouse to the menu to change the axis values/numbers, but just use a simple axis setup window, which you can enter with a simple press on a shortcut key
Beta Software
Re: Beta Software
Not sure if this has been mentioned or not
But I've just downloaded the latest version of the beta, when i first load up i don't get the option to work off like ( like the old one)
It loads the main display, but wont allow me to select or change the serial port as it keeps telling me it cant' connect to a ecu , the only option I have is exit which closes the software down
But I've just downloaded the latest version of the beta, when i first load up i don't get the option to work off like ( like the old one)
It loads the main display, but wont allow me to select or change the serial port as it keeps telling me it cant' connect to a ecu , the only option I have is exit which closes the software down
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Beta Software
No issues with regards to that here. It opens and works fine offline, with the usual warnings about serial port etc of course.onslack wrote:Not sure if this has been mentioned or not
But I've just downloaded the latest version of the beta, when i first load up i don't get the option to work off like ( like the old one)
It loads the main display, but wont allow me to select or change the serial port as it keeps telling me it cant' connect to a ecu , the only option I have is exit which closes the software down
Re: Beta Software
+1stevieturbo wrote:No issues with regards to that here. It opens and works fine offline, with the usual warnings about serial port etc of course.onslack wrote:Not sure if this has been mentioned or not
But I've just downloaded the latest version of the beta, when i first load up i don't get the option to work off like ( like the old one)
It loads the main display, but wont allow me to select or change the serial port as it keeps telling me it cant' connect to a ecu , the only option I have is exit which closes the software down
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Beta Software
Please can you take a video of this? I use sharex:onslack wrote:Not sure if this has been mentioned or not
But I've just downloaded the latest version of the beta, when i first load up i don't get the option to work off like ( like the old one)
It loads the main display, but wont allow me to select or change the serial port as it keeps telling me it cant' connect to a ecu , the only option I have is exit which closes the software down
https://getsharex.com/
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Beta Software
I'm back in the office tomorrow, and hope to get another update out this week to fix the issues mentioned above.
Re: Beta Software
I'll grab a video when I'm back on the laptop with the software installed on it ( later on this afternoon)
Re: Beta Software
I reloaded the current version that's listed for download on the 1st pageAlex DTA wrote:I'm back in the office tomorrow, and hope to get another update out this week to fix the issues mentioned above.
Seems to be working as per normal now
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Beta Software
It's there, but for some reason on the top left. No idea why, but I'll fix it.Shedley wrote:Hello Alex
I think i found another bug.
If you open for example the fuel map, and you maximize it, you don't have a button to bring it back to a small window Also, if you've maximized your window, and you go to graph view, there is no way to go back to the grid view
NotedShedley wrote:Another thing that i think that would be an improvement is you don't have to go with the mouse to the menu to change the axis values/numbers, but just use a simple axis setup window, which you can enter with a simple press on a shortcut key
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Beta Software
All the cropping issues are caused by you having a setting set to increase the text size. This means the text simply cannot fit in to the allocated space.stevieturbo wrote:Had another nosey again today.
Still a few cropping issues with text ( I have not changed my PC config at all, as I'm happy with how it is and do not want to change it. Besides....the on screen text is a normal size anyway ? )
So still various text cropped or missing on the menus.
The "Current ecu Map" or Current Map" text in green also seems to be in the wrong place on a few of the menu windows.
Just browsing through..I opened the twin injector table....this doesnt appear to re-size correctly..ie a lot of the table is out of view and stays out of view even when making the window bigger. And again, text in the menu window cropper or overlapping.
Boost base duty also has same behaviour
Using Traction menu as an example...lots of cropping etc here
Short video showing some of my other issues, unlisted video. Also just noticing, sensor scaling tables are not numbered down the left side, 1-20 as normal ? Not really an issue as such I guess.
To test this, do the following:
Right click on your desktop, and click Screen Resolution
Click the "Make text and other items larger or smaller" hyperlink.
You will have a value larger than the default value. Choose the default value.
You will then have to log off and back on.
The sensor scaling doesn't have the 1-20 values down the side in th eold software, so I didn't put them in again.