Beta Software

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.

Re: Beta Software

Postby Anders_Karlsson » Sun Feb 25, 2018 12:09 pm

I forgot to mention i use Windows 10, dont know if that makes any difference?
Anders_Karlsson
 
Posts: 116
Joined: Sat Jul 21, 2012 6:13 am
Location: Sweden
ECU Model: S80 Pro
Firmware Version: 66

Re: Beta Software

Postby Alex DTA » Mon Feb 26, 2018 4:56 am

Windows 10 shouldn't do that. I'll test it here.
Alex DTA
 
Posts: 1275
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Beta Software

Postby Alex DTA » Mon Feb 26, 2018 5:23 am

Your settings must be different somewhere then. This is what my screen looks like with the setting at 150% in W10:
Untitled.png


Do you know what other settings you have changed?
Alex DTA
 
Posts: 1275
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Beta Software

Postby bofelix » Tue Feb 27, 2018 4:09 am

Hello Alex,

sensor scaling allows to select a cylinder head temp sensor for aircooled engines (VW speedshop cyl head sensor). Maximum temperature is limited to 300°C.
Temperature limit in fuel compensation is 200°C.
Temp scaling for start fueling is limited to 120°C.

In the older SW it was the same, so it is not a bug of V85......

I would like to use my S60 on an aircooled beetle engine. At least the temp limit for start fueling should be lifted up in order to support hot start.

thank you, best regards
Stefan
bofelix
 
Posts: 24
Joined: Mon Apr 01, 2013 2:53 pm
ECU Model: S60 Pro
Distributor: roverdose
Firmware Version: 66

Re: Beta Software

Postby Alex DTA » Tue Feb 27, 2018 6:24 am

Fixed in the new software for both water temp compensations and start fueling.
Alex DTA
 
Posts: 1275
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Beta Software

Postby Anders_Karlsson » Tue Feb 27, 2018 11:44 am

Alex DTA wrote:Your settings must be different somewhere then. This is what my screen looks like with the setting at 150% in W10:
The attachment Untitled.png is no longer available


Do you know what other settings you have changed?


I´ll try 150%, i think my screen is at 125% now wich is the default.

Edit:
It got even worse with 150%.

I tried 100% and then the text is in the right place, but everything gets so small it gets hard to read.

This is a screenshot with 100% scaling.

100%scaling.PNG


And these are my settings for the program. I open properties for the program, choose compatibility and mark the checkbox with the text "Åsidosätt hög DPI-skalning".
Translated to english that should mean "disregard high DPI-scaling". Dont know
what it is called in english version of W10.

Properties_compatibility_DPI.PNG


If i uncheck that setting the text is in the right place but the resolution is a bit low with 125% scaling and 1920x1080 resolution wich is the default values for my laptop.
Its no big deal, but it is nicer to look at when things are a crisp and clear.
Anders_Karlsson
 
Posts: 116
Joined: Sat Jul 21, 2012 6:13 am
Location: Sweden
ECU Model: S80 Pro
Firmware Version: 66

Re: Beta Software

Postby Alex DTA » Tue Mar 20, 2018 12:51 pm

Real Time Mapping is nearly done, so we are looking good for a final beta at the end of next week.

This will bring the new software up to the same functionality as the old software.
I'll then look at how to add the keyboard functionality in a way that I'm happy with.
Alex DTA
 
Posts: 1275
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Beta Software

Postby Alex DTA » Thu Mar 29, 2018 2:32 pm

V85.12 is released. This is a full functionality version, and backwards compatible to at least v66.
Real Time mapping is there, the new log viewer is there as well.
Try it, take it mapping, let me know what you find.
Alex DTA
 
Posts: 1275
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Beta Software

Postby Jon K » Sun Apr 01, 2018 9:53 am

Alex DTA wrote:V85.12 is released. This is a full functionality version, and backwards compatible to at least v66.
Real Time mapping is there, the new log viewer is there as well.
Try it, take it mapping, let me know what you find.


Damn how'd I miss this? Going to give it a go ASAP! Any where I can read about whats new w/ real time mapping?
1992 700RWHP Pump Gas BMW
User avatar
Jon K
 
Posts: 589
Joined: Fri Dec 04, 2009 1:45 am
Location: Pennsylvania, USA
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73

Re: Beta Software

Postby Alex DTA » Mon Apr 02, 2018 2:14 pm

The idea with this release is to have all the same functionality as the existing software.
The main change is the crosshairs instead of the two yellow bars.

As per the first page, the keyboard shortcuts are planned for the end of this month.
Part of that will be the Auto DBW control for mapping. I doubt anyone uses the current version.
Alex DTA
 
Posts: 1275
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

PreviousNext

Return to Software, Firmware, and Data Logging

Who is online

Users browsing this forum: No registered users and 3 guests