Fails to unlock map in dtaswin.

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.

Fails to unlock map in dtaswin.

Postby engen » Tue Jun 26, 2018 12:00 pm

Hi

After I changed the serie data output settings acording to the getting started guide on dtadroid.com I cant unlock the map on dtaswin.

When i type inn my pin code and try to unlock the map I get the message "failed to unlock map. Try again."

When i cross it out i get a error message saying the ecu is not responding, please try again.
engen
 
Posts: 8
Joined: Wed May 18, 2016 5:05 am
ECU Model: S80 Pro

Re: Fails to unlock map in dtaswin.

Postby Alex DTA » Tue Jun 26, 2018 2:31 pm

You have a USB driver issue most likely.
Download the correct version from the website, then follow the update guide also from the website.
Alex DTA
 
Posts: 1275
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Fails to unlock map in dtaswin.

Postby engen » Tue Jun 26, 2018 5:31 pm

Im not using a usb port. I use a laptop with a rs232 connector.
And even i get the message that the ecu is not responding I get the realtime info on rpm tps water temp etc.
engen
 
Posts: 8
Joined: Wed May 18, 2016 5:05 am
ECU Model: S80 Pro

Re: Fails to unlock map in dtaswin.

Postby Antral » Wed Jun 27, 2018 3:16 am

Check that you don't have a bent pin in the 15 pin connector.
Antral
 
Posts: 185
Joined: Mon Aug 01, 2011 8:20 am

Re: Fails to unlock map in dtaswin.

Postby engen » Wed Jun 27, 2018 4:56 am

All the pins are fine.

This problem came immediately after I changed the settings to use dta droid. Also if I type in the wrong pin code it says I have the wrong pin code. But with the right one it fails to unlock.
engen
 
Posts: 8
Joined: Wed May 18, 2016 5:05 am
ECU Model: S80 Pro

Re: Fails to unlock map in dtaswin.

Postby Alex DTA » Wed Jun 27, 2018 11:46 am

What version of the software are you using?
Alex DTA
 
Posts: 1275
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Fails to unlock map in dtaswin.

Postby engen » Wed Jun 27, 2018 11:59 am

Im using the newest. V85.30.
engen
 
Posts: 8
Joined: Wed May 18, 2016 5:05 am
ECU Model: S80 Pro

Re: Fails to unlock map in dtaswin.

Postby Alex DTA » Wed Jun 27, 2018 2:13 pm

Try 82.16:
http://www.dtafast.co.uk/download_files ... Series.zip

Looks like you've found a bug in the new software.
Alex DTA
 
Posts: 1275
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Fails to unlock map in dtaswin.

Postby engen » Thu Jun 28, 2018 3:34 pm

Ok I will test that tomorrow.
engen
 
Posts: 8
Joined: Wed May 18, 2016 5:05 am
ECU Model: S80 Pro

Re: Fails to unlock map in dtaswin.

Postby engen » Fri Jun 29, 2018 3:31 pm

With the 82.16 software I first get the message. "Map not transferred successfully, Please try again" when i press try again a couple pf times i get the message "Ecu not responding, please try again"

I still get the info on rpm and water temp tps etc.
engen
 
Posts: 8
Joined: Wed May 18, 2016 5:05 am
ECU Model: S80 Pro

Next

Return to Software, Firmware, and Data Logging

Who is online

Users browsing this forum: No registered users and 3 guests