Basic Dash NT setup

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Post Reply
Roger1585
Posts: 2
Joined: Tue Nov 27, 2018 9:33 am
ECU Model: S60 Pro

Basic Dash NT setup

Post by Roger1585 »

A very simple question. Do you need the dash connected to the ECU in order to send a configuration from the PC. Manual doesn't say so but cannot get PC to recognise that dash is connected.
Thanks for any help. I suspect there will be several basic questions tome.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Basic Dash NT setup

Post by Alex DTA »

Nope.

All that's needed is power to the dash, and the USB connected to the PC.
Roger1585
Posts: 2
Joined: Tue Nov 27, 2018 9:33 am
ECU Model: S60 Pro

Re: Basic Dash NT setup

Post by Roger1585 »

Thanks, I assumed the USB would provide the power, will now wait until car is running to set up the dashboard and go back to trying to understand the data logging details.
Post Reply