Hi all, I’ve been trying to update the pc software on my old xp laptop but even though it says it’s the latest version (s60 version 89) the screen still shows the same old layout as before and doesn’t have the throttle blip setup that I need.
I’ve made sure I downloaded the xp version and even tried the windows 10 one just in case.
Any ideas what I could be doing wrong.
Cheers.
Windows xp
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Windows xp
I think you have an XP version and other. Make sure you use the XP version?
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Windows xp
Are you connected to the S60?
Please take a screenshot of the software with the shift cut screen open. I need to see the whole screen, so use Print Screen.
You can email it to us if you don't want to upload it here.
Please take a screenshot of the software with the shift cut screen open. I need to see the whole screen, so use Print Screen.
You can email it to us if you don't want to upload it here.
Re: Windows xp
Ahh, I see now, I was comparing the screen to the one on my windows 10 pc.
Cheers Alex.
Cheers Alex.