S60 pro intermittent faults

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.

S60 pro intermittent faults

Postby gsxr2mil » Mon Jun 10, 2019 6:57 pm

I have various intermittent faults over 2000 of them coming from oil pressure sensor, pressure sensor and fuel sensor and they are zeroed out in the ecu setting and not even fitted on the bike and its giving me crazy crank errors and keeps shutting the bike off. Are the Intermittent faults a very strong possibility giving the crank sensor noise interference causing.errors, will not let me upload pic otherwise I would.
Posts: 46
Joined: Wed Feb 14, 2018 8:05 am
ECU Model: S60 Pro
Distributor: creative custom racing Frank
Firmware Version: 79.06

Re: S60 pro intermittent faults

Postby Rob Stevens » Tue Jun 11, 2019 8:06 am

Wow, just slow down a bit!
1. Has it ever run correctly?
2. I assume you have all the warnings and shut downs turned off, if so don't worry about the diagnostics on the sensors for now.
3. Concentrate on the crank errors.

Run the coil test at the same time as gatherthering oscilloscope data, with engine not running. This will show if you have interference.
Rob Stevens
Posts: 1071
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Return to Software, Firmware, and Data Logging

Who is online

Users browsing this forum: No registered users and 1 guest