Page 1 of 1

USE LOAD CELL TO START CUT (S60+)?

Posted: Mon Mar 16, 2020 7:56 am
by re33
Hi I have 5 year old S60, can't remember what firmware is installed at the minute but am trying to incorporate a load cell to initiate flat shift. 5 years ago, I used a switch in the gearknob, which did work okay but have a new gearbox and would prefer to use a load cell.

In the updated 2019 S60 manual it says this is an option Page 206 "USE LOAD CELL TO START CUT (S60+)". If I update my firmware will I be able to use this option? Or what does S60+ mean, it is a specific model?

Thanks for your help.

Re: USE LOAD CELL TO START CUT (S60+)?

Posted: Mon Mar 16, 2020 8:57 am
by Alex DTA
Yes, update your firmware and you will be able to use a load cell.

Re: USE LOAD CELL TO START CUT (S60+)?

Posted: Mon Mar 16, 2020 12:53 pm
by re33
Perfect, thanks.

Re: USE LOAD CELL TO START CUT (S60+)?

Posted: Sat Apr 04, 2020 6:55 pm
by pule333
re33 wrote:Hi I have 5 year old S60, can't remember what firmware is installed at the minute but am trying to incorporate a load cell to initiate flat shift. 5 years ago, I used a switch in the gearknob, which did work okay but have a new gearbox and would prefer to use a load cell.

In the updated 2019 S60 manual it says this is an option Page 206 "USE LOAD CELL TO START CUT (S60+)". If I update my firmware will I be able to use this option? Or what does S60+ mean, it is a specific model?

Thanks for your help.
hi. quick question, what load cell are you using?