Long log export time

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Post Reply
aleksanderk
Posts: 54
Joined: Fri Feb 01, 2019 4:36 pm
ECU Model: S80 Pro
Firmware Version: 6500

Long log export time

Post by aleksanderk »

When exporting logs, it takes very long time if the logs are long. Is it supposed to be like this?
I usually have to wait longer for the log to export than the log length itself.

Log freq. at 10Hz and logging 11 items.
stevieturbo
Posts: 3297
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Long log export time

Post by stevieturbo »

exporting ?

DTA has always been extremely slow to retrieve datalogs.

But is this a new problem for you, or always been the same ?
aleksanderk
Posts: 54
Joined: Fri Feb 01, 2019 4:36 pm
ECU Model: S80 Pro
Firmware Version: 6500

Re: Long log export time

Post by aleksanderk »

Yeah, save datalogs to computer.

It has always been slow, and I know that there is limitations to the serial communication, but I wasn't expecting it to be this slow.
Logging for 10 minutes results in about 14 minutes of waiting for the log to be saved. It starts off really good, but after a minute I can see that the "timer" slow down significally.
I have checked the baud rate and that's fine.
Alex DTA
Posts: 1511
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Long log export time

Post by Alex DTA »

Make sure you're on the latest version, there was a bug in the downloads not so long ago.
aleksanderk
Posts: 54
Joined: Fri Feb 01, 2019 4:36 pm
ECU Model: S80 Pro
Firmware Version: 6500

Re: Long log export time

Post by aleksanderk »

Latest version of DTASwin or FW?
Alex DTA
Posts: 1511
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Long log export time

Post by Alex DTA »

Swin
Post Reply