S100 latest firmare

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
bmwe36m3
Posts: 34
Joined: Thu Jan 28, 2016 5:51 am
ECU Model: S100 Pro

S100 latest firmare

Post by bmwe36m3 »

what are the benefits in upgrading to the latest s100 firmware? How to I go about uploading the new firmware to the s100 unit?
Ralph
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: S100 latest firmare

Post by Alex DTA »

Depends on what your current firmware is.

Guide here:
https://www.dtafast.co.uk/download_file ... TA%20S.pdf
bmwe36m3
Posts: 34
Joined: Thu Jan 28, 2016 5:51 am
ECU Model: S100 Pro

Re: S100 latest firmare

Post by bmwe36m3 »

Thanks Alex, I will check
bmwe36m3
Posts: 34
Joined: Thu Jan 28, 2016 5:51 am
ECU Model: S100 Pro

Re: S100 latest firmare

Post by bmwe36m3 »

Hi Alex, This is what was displayed, the current firmware is as follows:
DTA Swin V82.16 - ECU:- S100V62.01 COMS: - RS232
What do you think, should we update?
Ralph
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: S100 latest firmare

Post by Alex DTA »

There are a lot of updates since then, but I would only bother if there's some functionality you need.
bmwe36m3
Posts: 34
Joined: Thu Jan 28, 2016 5:51 am
ECU Model: S100 Pro

Re: S100 latest firmare

Post by bmwe36m3 »

we want to run our bmws65 race car engine in closed loop, currently running in open loop with one wideband sensor.
bmwe36m3
Posts: 34
Joined: Thu Jan 28, 2016 5:51 am
ECU Model: S100 Pro

Re: S100 latest firmare

Post by bmwe36m3 »

Hi Alex, we also want to run two wideband sensors and have the data sent to our race technology pod dash. Can the updated firmware capture both sensors data and send to the dash using the Can stream?
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: S100 latest firmare

Post by Alex DTA »

bmwe36m3 wrote:Hi Alex, we also want to run two wideband sensors and have the data sent to our race technology pod dash. Can the updated firmware capture both sensors data and send to the dash using the Can stream?
Yes
bmwe36m3
Posts: 34
Joined: Thu Jan 28, 2016 5:51 am
ECU Model: S100 Pro

Re: S100 latest firmare

Post by bmwe36m3 »

Thanks Alex,
can you provide the data for us to complete the screen to run closed loop in our bmw s65 engine when we add the 2nd wide band sensor. We plan to order the Innovate DLG-1 system unless you have a better suggestion to work with the S100
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: S100 latest firmare

Post by Alex DTA »

bmwe36m3 wrote:Thanks Alex,
can you provide the data for us to complete the screen to run closed loop in our bmw s65 engine when we add the 2nd wide band sensor. We plan to order the Innovate DLG-1 system unless you have a better suggestion to work with the S100
I'll need a bit of information to set that up, so best email me. office@dtafast.co.uk
Post Reply