Firmware too old for newest version of DTA Swin

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Post Reply
molecular bob
Posts: 35
Joined: Wed Feb 22, 2012 3:50 am
ECU Model: No ECU
Firmware Version: 31

Firmware too old for newest version of DTA Swin

Post by molecular bob »

Hi All the DTA S60 on my project Caterham is firmware version 52.00 on hardware version 5.

I need to update to complete my engine swap from VX to Duratec, so need to update the firmware (or find an old version of DTA Swin). First thing I need to do is make up a Flash lead. It looks like the shells of my serial lead could be disassembled for access, so is it just a case of adding a momentary switch across 2 pins?

Will it update Ok with such a big gap in firmware versions, or should I be looking for some older intermediate versions and doing it in steps? I guess the software will talk to the ecu if I can get it to above version 70.00?
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Firmware too old for newest version of DTA Swin

Post by Alex DTA »

Use this version of SWin:
https://www.dtafast.co.uk/download_file ... Series.zip

Flash lead requires a NO switch across pins 8 and 13.
Post Reply