Cheersibizacupra wrote:looking good luke
Alternative DTA dash
Re: Alternative DTA dash
Re: Alternative DTA dash
Hi,
Been a while but actually have my first unit built, and installed in my own car.
Some pictures of it:
Pre install:
Installed:
Current spec is as follows:
* USB Connection for firmware upgrade and setting adjustments
* Simple plug and play loom that just requires connection to ECU and 12v/GND
* Numerous display screens for:
Sensor readings
Throttle
Boost
Battery
*Live dash for water/air readings
*Shift light with 3 temperature settings for cold/warm/hot engine. It allows different thresholds for different warmness of the engine
*Warning displays for overboost/overcharge/over-rev etc..
Will be building the first 10 units in the next two weeks
Cheers
Luke
Been a while but actually have my first unit built, and installed in my own car.
Some pictures of it:
Pre install:
Installed:
Current spec is as follows:
* USB Connection for firmware upgrade and setting adjustments
* Simple plug and play loom that just requires connection to ECU and 12v/GND
* Numerous display screens for:
Sensor readings
Throttle
Boost
Battery
*Live dash for water/air readings
*Shift light with 3 temperature settings for cold/warm/hot engine. It allows different thresholds for different warmness of the engine
*Warning displays for overboost/overcharge/over-rev etc..
Will be building the first 10 units in the next two weeks
Cheers
Luke
-
- Posts: 36
- Joined: Sat Jul 21, 2012 12:33 am
- ECU Model: S40 Pro
- Distributor: Mefmotorsport
- Firmware Version: 77
- Location: The Netherlands
- Contact:
Re: Alternative DTA dash
your images arn't working...
-
- Posts: 96
- Joined: Sat Nov 12, 2011 6:24 pm
- ECU Model: S100 Pro
- Firmware Version: 61
- Location: Montreal, Canada
Re: Alternative DTA dash
They are for me... Maybe your browser settings are screwing with the images?pro2call wrote:your images arn't working...
-
- Posts: 3586
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Alternative DTA dash
Working here too
Re: Alternative DTA dash
And here.
Looks good.
How much are these going to be now you have one built ?
Looks good.
How much are these going to be now you have one built ?
Re: Alternative DTA dash
Just getting final costings through now for looms and cases.. I think the final cost is going to be £120...claggett wrote:And here.
Looks good.
How much are these going to be now you have one built ?
Cheers
Luke
Re: Alternative DTA dash
Just a bit more info:
Just measured the physical box and its:
L=113mm
W=83mm
D=30mm
The loom connection comes to the rear of the unit, so that you cannot see the connection. The only visible connection is the USB port on the left hand side but this is only for settings/update so not connected all the time.
Cheers
Luke
Just measured the physical box and its:
L=113mm
W=83mm
D=30mm
The loom connection comes to the rear of the unit, so that you cannot see the connection. The only visible connection is the USB port on the left hand side but this is only for settings/update so not connected all the time.
Cheers
Luke
Re: Alternative DTA dash
Hi,
An update for the two colour screen options. Opinions please
Green or Blue:
Also shipping 2 this week so now getting to the point where its fully production/sales ready.
Cheers
Luke
An update for the two colour screen options. Opinions please
Green or Blue:
Also shipping 2 this week so now getting to the point where its fully production/sales ready.
Cheers
Luke
- 86sixsix
- Posts: 139
- Joined: Fri Aug 05, 2011 8:01 am
- ECU Model: S40 Pro
- Distributor: http://www.dtafast.co.uk
- Firmware Version: 78.01
- Location: A cold garage / Sideways 'round cascades
- Contact:
Re: Alternative DTA dash
blue's tasty. you could have a feed in off your lights or something for a night mode
Renault 1.6 K7M, '92 Clio 16v shell, Rotrex C30-74, S40, Faceache, Sh***er, YouTube Blue Shed Channel