CAN

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
User avatar
ignitionautosport
Posts: 577
Joined: Wed Jul 27, 2011 5:30 am
ECU Model: S80 Pro
Location: New Zealand
Contact:

Re: CAN

Post by ignitionautosport »

Look up AIM CAN protocol, I know someone had a DTA connected to an MXL and it 'just worked' supposedly.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
glasan
Posts: 5
Joined: Wed Oct 19, 2011 8:15 am
ECU Model: S80 Pro
Distributor: Directly from DTA Fast
Firmware Version: 63
Location: Moscow
Contact:

Re: RT MK3 + S80 via CAN

Post by glasan »

OK, now I've got the Config file from RT.
lumley 32 was right, filtering not used. Also it utilize standard Intel byte order. Analysis V8 software detects needed variable channels from DTA CAN but all have no data.
Now trying adjust DASH4 to show data directly from ECU without success. Dash indicates all analogues from datalogger but nothing from ECU. Still try..
glasan
Posts: 5
Joined: Wed Oct 19, 2011 8:15 am
ECU Model: S80 Pro
Distributor: Directly from DTA Fast
Firmware Version: 63
Location: Moscow
Contact:

Re: RT MK3 + S80 via CAN

Post by glasan »

OK, now I've got the Config file from RT.
lumley 32 was right, filtering not used. Also it utilize standard Intel byte order. Analysis V8 software detects needed variable channels from DTA CAN but all have no data.
Now trying adjust DASH4 to show data directly from ECU without success. Dash indicates all analogues from datalogger but nothing from ECU. Still try..
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: CAN

Post by stevieturbo »

You can use Lite-monitor on the computer to view the data from the CAN adaptor

But as said, I tried this for a few days and gave up. The config file RT sent did not work, and they offered no help at all either via email or their forum.

All I can say is good luck.
glasan
Posts: 5
Joined: Wed Oct 19, 2011 8:15 am
ECU Model: S80 Pro
Distributor: Directly from DTA Fast
Firmware Version: 63
Location: Moscow
Contact:

Re: CAN

Post by glasan »

Ignition Autosport, we used AIM MyChron 3 Visor dash last year that receives all data from S80 CAN bus. Works fine and CAN protocol specs no needed because it's fully plug&play unit. I've tried to find some info in AIM software and manuals but only channels name described and no more.
JDM Dyno
Posts: 1
Joined: Mon Feb 11, 2013 1:42 pm
ECU Model: S80 Pro
Distributor: DTA Fast
Firmware Version: 66

Re: CAN

Post by JDM Dyno »

attachment for v8 RT CAN works ok on S40 and DASH 2 with DL1

Hope This helps someone as it took me some time to get it to work!

Johnathan

[The extension ccf has been deactivated and can no longer be displayed.]

Post Reply