I have a very old ECU...

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
pro2call
Posts: 36
Joined: Sat Jul 21, 2012 12:33 am
ECU Model: S40 Pro
Distributor: Mefmotorsport
Firmware Version: 77
Location: The Netherlands
Contact:

Re: I have a very old ECU...

Post by pro2call »

check your mail agian ;)

it's version 27
Mikey G
Posts: 10
Joined: Sat Jul 14, 2012 2:46 pm
ECU Model: No ECU

Re: I have a very old ECU...

Post by Mikey G »

Got it, thanks, wont open on my laptop but I have other machines to put it on. Will give it a go on the weekend.

Thanks again 8-)
pro2call
Posts: 36
Joined: Sat Jul 21, 2012 12:33 am
ECU Model: S40 Pro
Distributor: Mefmotorsport
Firmware Version: 77
Location: The Netherlands
Contact:

Re: I have a very old ECU...

Post by pro2call »

no problem...

do you have an computer with an floppy drive and an serial port on the motherboard?

i could make an floppy image..
Mikey G
Posts: 10
Joined: Sat Jul 14, 2012 2:46 pm
ECU Model: No ECU

Re: I have a very old ECU...

Post by Mikey G »

Yes but thats no problem, got it to run on a DOSbox on my laptop. My guess is the USB wont work so will have to use my desktop until I can get my serial ported laptop fixed.

Thanks for the help.

Mike
Mikey G
Posts: 10
Joined: Sat Jul 14, 2012 2:46 pm
ECU Model: No ECU

Re: I have a very old ECU...

Post by Mikey G »

Well DTAdos has successfully connected to the ECU, thanks for the help ;)
Now just need to find out the pin number...
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: I have a very old ECU...

Post by Rob Stevens »

well there is only 9999 options! Someone here made a bit of software to do it for you, no idea who however.
Roverdose
Posts: 318
Joined: Tue Aug 09, 2011 2:54 pm
ECU Model: S80 Pro
Distributor: Roverdose
Location: Stevenage
Contact:

Re: I have a very old ECU...

Post by Roverdose »

i think it was Phazer.
memberlist.php?mode=viewprofile&u=114

Drew
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: I have a very old ECU...

Post by stevieturbo »

Send it back to DTA for the chip upgrade ! They can probably unlock it too
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

Re: I have a very old ECU...

Post by mefmotorsport »

It's OK, I sorted it for him!

Martin
Post Reply