I have a very old ECU...

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Mikey G
Posts: 10
Joined: Sat Jul 14, 2012 2:46 pm
ECU Model: No ECU

Re: I have a very old ECU...

Post by Mikey G »

Oh right, cheers...
DTA themselves was my next port of call but according to the cars owner they werent very helpfull when he got in touch with them.
lumley32
Posts: 214
Joined: Mon May 10, 2010 5:09 pm
ECU Model: S80 Pro
Firmware Version: 61

Re: I have a very old ECU...

Post by lumley32 »

i have herd people say that, but i have always got on well with Allan, even if we dont see eye to eye on everything!
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: I have a very old ECU...

Post by stevieturbo »

Mikey G wrote:Oh right, cheers...
DTA themselves was my next port of call but according to the cars owner they werent very helpfull when he got in touch with them.
Allan has always been very helpful when Ive contacted him.
VR6Turbo
Posts: 329
Joined: Wed Mar 17, 2010 9:24 am
ECU Model: S80 Pro
Firmware Version: 62

Re: I have a very old ECU...

Post by VR6Turbo »

Helpful or not, he's still unnecessarily rude and arrogant a lot of the time. You shouldn't have to tread on egg shells around a service provider. Us buying his ECUs puts bread on his table and he'd do well to remember that when speaking to his customers.
Antral
Posts: 194
Joined: Mon Aug 01, 2011 8:20 am

Re: I have a very old ECU...

Post by Antral »

Your ECU just needs an upgrade chip fitting even if it was on DOS the new chip will allow it to work on windows ie DTAWin software, ask DTA they are not as bad as some would have you think...
User avatar
mefmotorsport
Posts: 543
Joined: Mon Aug 01, 2011 6:45 am
ECU Model: S100 Pro
Distributor: Mefmotorsport
Firmware Version: 79
Location: Merseyside
Contact:

Re: I have a very old ECU...

Post by mefmotorsport »

VR6Turbo wrote:Helpful or not, he's still unnecessarily rude and arrogant a lot of the time. You shouldn't have to tread on egg shells around a service provider. Us buying his ECUs puts bread on his table and he'd do well to remember that when speaking to his customers.

PMSL ! very accurate and also very true! He is very clever but not so good at customer relations! However, do give DTA a ring, you may well get some helpful advice from his "technical assistant"

Martin
pro2call
Posts: 36
Joined: Sat Jul 21, 2012 12:33 am
ECU Model: S40 Pro
Distributor: Mefmotorsport
Firmware Version: 77
Location: The Netherlands
Contact:

Re: I have a very old ECU...

Post by pro2call »

I can supply you dtados if you want?

i don't know the version of it.
Mikey G
Posts: 10
Joined: Sat Jul 14, 2012 2:46 pm
ECU Model: No ECU

Re: I have a very old ECU...

Post by Mikey G »

Not had the chance to revisit this over the last couple of weeks...
pro2call wrote:I can supply you dtados if you want?

i don't know the version of it.
I'll PM you my email address if you dont mind sending it over?
Worth a try.
Cheers
pro2call
Posts: 36
Joined: Sat Jul 21, 2012 12:33 am
ECU Model: S40 Pro
Distributor: Mefmotorsport
Firmware Version: 77
Location: The Netherlands
Contact:

Re: I have a very old ECU...

Post by pro2call »

check your mail....
Mikey G
Posts: 10
Joined: Sat Jul 14, 2012 2:46 pm
ECU Model: No ECU

Re: I have a very old ECU...

Post by Mikey G »

Nothing yet, did you send to the address I sent you?

Cheers
Post Reply