Can not flash the ECU

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Post Reply
peter575
Posts: 15
Joined: Tue Jul 26, 2011 2:56 am
ECU Model: S60 Pro
Firmware Version: 60
Location: The Netherlands, Rotterdam

Can not flash the ECU

Post by peter575 »

I tried to flash my ECU (s60 version 60.7 to 63.01) but I can not figure out what is going wrong. Can anyone help? I have attached 2 files to make the problem clear;

Image

Look like "block(s) is/are missing...?

Image
S60 Pro user
science
Posts: 13
Joined: Sun Oct 16, 2011 10:48 am

Re: Can not flash the ECU

Post by science »

I just got the same error with my S80, and it seems like my box is no longer functional.
User avatar
ignitionautosport
Posts: 577
Joined: Wed Jul 27, 2011 5:30 am
ECU Model: S80 Pro
Location: New Zealand
Contact:

Re: Can not flash the ECU

Post by ignitionautosport »

I had that last time I did an update, restarted the program and re-powered the ecu, a couple of goes and I had blocks as usual ready to flash properly, went without a hitch.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
Post Reply