PIN Number Removal

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Post Reply
Azrael
Posts: 3
Joined: Wed Aug 17, 2011 6:57 am
ECU Model: S60 Pro
Firmware Version: 59
Location: High Peak

PIN Number Removal

Post by Azrael »

Apologies for another PIN no thread, but I've trawled both the forum and the manual...

S60, Software version 59, when connecting to the ECU I get the 'PIN Number required' at the map locking screen. Now, I do have the PIN number but is there any way that once the code has been entered that you can remove the requirement to enter it every time you connect?

Cheers
Image
Antral
Posts: 194
Joined: Mon Aug 01, 2011 8:20 am

Re: PIN Number Removal

Post by Antral »

Yes.
Once you have connected to the ECU unlock the map twice once after the other,this will stop you from needing a pin number in future. ;) :geek:
Azrael
Posts: 3
Joined: Wed Aug 17, 2011 6:57 am
ECU Model: S60 Pro
Firmware Version: 59
Location: High Peak

Re: PIN Number Removal

Post by Azrael »

Doh! That simple?! :oops:

Thankyou very much Antral, I'll give that a try.

:ugeek:
Image
Post Reply