Apologies for another PIN no thread, but I've trawled both the forum and the manual...
S60, Software version 59, when connecting to the ECU I get the 'PIN Number required' at the map locking screen. Now, I do have the PIN number but is there any way that once the code has been entered that you can remove the requirement to enter it every time you connect?
Cheers
PIN Number Removal
Re: PIN Number Removal
Yes.
Once you have connected to the ECU unlock the map twice once after the other,this will stop you from needing a pin number in future.
Once you have connected to the ECU unlock the map twice once after the other,this will stop you from needing a pin number in future.
-
- Posts: 3
- Joined: Wed Aug 17, 2011 6:57 am
- ECU Model: S60 Pro
- Firmware Version: 59
- Location: High Peak
Re: PIN Number Removal
Doh! That simple?!
Thankyou very much Antral, I'll give that a try.
Thankyou very much Antral, I'll give that a try.