Stevie,
Can this issue be related to the inhibition of at l u sp.?
I had said in an old topic.
Incorrect rpm values
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Incorrect rpm values
I dont think so. Did you never get the speed issue resolved ?
-
- Posts: 54
- Joined: Thu Sep 22, 2011 6:42 pm
- ECU Model: S80 Pro
- Firmware Version: 71
- Location: Greece
- Contact:
Re: Incorrect rpm values
Stevie here is the 100hz log you ask me
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Incorrect rpm values
I would say that all readings on the log look fine when viewed in E-Race. I dont see anything odd in Excel either. There are some rpm rises when on full boost/load. But they could be a little bit of wheelspin, clutch slip, or just down to the road surface.
I dont see anything strange in that log at all ?
I dont see anything strange in that log at all ?
-
- Posts: 54
- Joined: Thu Sep 22, 2011 6:42 pm
- ECU Model: S80 Pro
- Firmware Version: 71
- Location: Greece
- Contact:
Re: Incorrect rpm values
I think is the Road surface because the
road i make the tests runs is not very flat.
road i make the tests runs is not very flat.
-
- Posts: 54
- Joined: Thu Sep 22, 2011 6:42 pm
- ECU Model: S80 Pro
- Firmware Version: 71
- Location: Greece
- Contact:
Re: Incorrect rpm values
No i didn't resolve this issue, actually i never search till now.stevieturbo wrote:I dont think so. Did you never get the speed issue resolved ?
Have you an idea....
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Incorrect rpm values
I cant think what would be causing it.
Did you ever do a log of driving ( 10Hz is plenty ) with all wheel speed parameters being logged ? Basically log as much as possible.
I use the GT101 sensors on mine, and it just works at all speeds with no problems.
Did you ever do a log of driving ( 10Hz is plenty ) with all wheel speed parameters being logged ? Basically log as much as possible.
I use the GT101 sensors on mine, and it just works at all speeds with no problems.
-
- Posts: 54
- Joined: Thu Sep 22, 2011 6:42 pm
- ECU Model: S80 Pro
- Firmware Version: 71
- Location: Greece
- Contact:
Re: Incorrect rpm values
I'm using the same sensor but only for undriven wheel.