I would like to request from DTA ...

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: I would like to request from DTA ...

Post by stevieturbo »

Page wrote:
Okay, i 'll get my self a new air sensor (bosch 0280 130 039) and wired up to GND Sensor 33 pin and Ana 3/ Gear Pot .

And ...
For a n/a application it may be ok. But in general, I would say do not use that sensor. It is a woefully slow response time, something like 20 seconds !!

Use an open bulb thermistor type sensor.

Something like this.

http://www.ebay.co.uk/itm/Ford-Cosworth ... 43ac8032d1
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: I would like to request from DTA ...

Post by stevieturbo »

Page wrote:Where do i contact Alan ( i believe).
I'll do my request and see what happens .


http://www.dtafast.co.uk/contact.htm
Post Reply