Flash Button

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Post Reply
Bollah
Posts: 130
Joined: Tue Jul 26, 2011 10:15 am
ECU Model: S60 Pro
Firmware Version: 71

Flash Button

Post by Bollah »

I currently have a comms cable to connect to my S60, but would like to put the latest version of the firmware on, but realise I don't have the special 'flash' button. Obviously this is a case of a push button and connecting to to each pin on the comms cable, but I can't seem to find anything about on DTA on which pins to use.

So was wondering if anyone on here does know? :)

Thanks
Antral
Posts: 194
Joined: Mon Aug 01, 2011 8:20 am

Re: Flash Button

Post by Antral »

Look on the wiring diag. it say,s between pin 8 & 13 ( centre of page). ;)
Bollah
Posts: 130
Joined: Tue Jul 26, 2011 10:15 am
ECU Model: S60 Pro
Firmware Version: 71

Re: Flash Button

Post by Bollah »

Which wiring diagram? :oops:
VR6Turbo
Posts: 329
Joined: Wed Mar 17, 2010 9:24 am
ECU Model: S80 Pro
Firmware Version: 62

Re: Flash Button

Post by VR6Turbo »

Antral
Posts: 194
Joined: Mon Aug 01, 2011 8:20 am

Re: Flash Button

Post by Antral »

All of the s series ones. :roll:
Bollah
Posts: 130
Joined: Tue Jul 26, 2011 10:15 am
ECU Model: S60 Pro
Firmware Version: 71

Re: Flash Button

Post by Bollah »

duh me :oops: Been through all the documents expecting to see something with a whole page to it, but I was skim reading whilst trying to work. Sorry :lol:
VR6Turbo
Posts: 329
Joined: Wed Mar 17, 2010 9:24 am
ECU Model: S80 Pro
Firmware Version: 62

Re: Flash Button

Post by VR6Turbo »

I think we've all been guilty of that at least once ;)
Post Reply