I havn't seen any mention of this so far on here so I thought I'd bring it to everyones attention!
V73 Release:- Paddle Shift Controller
V73 Adds the ability to use the extra functionality of an S100, not needed for most engine applications, to act as a fully featured paddle shift gearbox controller.
Configurable for most sequential gearbox layouts, with different 1/2 shift neutral positions. RPM limited downshifts, closed loop up and downshifts, variable throttle
blipper lead and timing as well as RPM and paddle pull triggered auto upshifting. Configurable anti push system for downshifts.
Safety features include position sensor limits and sanity checking, stuck down paddle rejection as well as neutral button requirements.
I'm currently looking into the hardware side of this and fitting it to my BMW rally car which has a Tractive RD906 sequential box........
Hopefully I will be able to market a full kit to go with the ecu at some point.
martin
V73 incorporates Paddle shift control
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: V73 incorporates Paddle shift control
Hardware is available from 'platskool' also. I've made my own kit and will be fitting it to the car soon.
Also of interest is that fact that an S80 can be upgraded to a S100 back at DTA for this padel use.
Also of interest is that fact that an S80 can be upgraded to a S100 back at DTA for this padel use.
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: V73 incorporates Paddle shift control
Yes, I have been talking to Nick Algar of Playskool Motorsport about the hardware, he's sent me some pictures of whats required.
I also paid a visit to DTA to look at Allans Caterham which has all the Playskool kit installed and working, it seems to be very simple, not rocket science!
Fortunately I have already upgraded to an S100 so I'm ready to get the parts together and make some progress, what parts did you source yourself?
Martin
I also paid a visit to DTA to look at Allans Caterham which has all the Playskool kit installed and working, it seems to be very simple, not rocket science!
Fortunately I have already upgraded to an S100 so I'm ready to get the parts together and make some progress, what parts did you source yourself?
Martin
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: V73 incorporates Paddle shift control
I got the main air ram out of a catalogue 25mm bore by 100mm stroke, but I only needed 50mm stroke -doh. also Allan is using a 32mm ram with less leverage, the air regulator was tricky, we ended up using a gas regulator from a mig gas bottle, dirt cheap but had to mod it a little to get the flow and pressure required, 120psi. The throttle blipper was 10mm bore by 25mm stroke, but there are nice concentric ones out there that I would recommend. The valve blocks were from a catalogue but look OTT compared to Allans ones, much neater.
The paddles I made myself. The air tank is from a paint ball thing. But depending on use you may need a compressor, I only do hill climbs
The paddles I made myself. The air tank is from a paint ball thing. But depending on use you may need a compressor, I only do hill climbs