DTA E48 Cable with 9 pins and 3 pin connector for what ?

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Post Reply
C20XER
Posts: 8
Joined: Thu Dec 22, 2011 5:14 pm
ECU Model: P8 Pro
Distributor: Private EBAY
Firmware Version: 34
Location: Germany

DTA E48 Cable with 9 pins and 3 pin connector for what ?

Post by C20XER »

Hoi Forum,

i had bought twice a DTA E48 . By the ECu is a cable with 9 pine male and female.
And a 3 pin male connector.

But the ECU had only a 15 pin femal conect.

For what is the cable, with cani doing with it ?

Here a little Pic of it
Attachments
DTA Kabel.JPG
Last edited by C20XER on Fri Jul 11, 2014 9:04 am, edited 1 time in total.
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: DTA E48 Cable with 9 pins and 3 pin connector for what ?

Post by katana »

No idea but it can't be used with the DTA! DTA correct cable will have 9 pin PC Serial port connection and 15 pin ECU connection. Other alternative is 9 pin serial to USB adaptor or if laptop has a PCMIA port you could use a Serial PCMIA card!
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: DTA E48 Cable with 9 pins and 3 pin connector for what ?

Post by stevieturbo »

As above, no idea what that is for.

http://www.quantums.info/dtalead.htm
C20XER
Posts: 8
Joined: Thu Dec 22, 2011 5:14 pm
ECU Model: P8 Pro
Distributor: Private EBAY
Firmware Version: 34
Location: Germany

Re: DTA E48 Cable with 9 pins and 3 pin connector for what ?

Post by C20XER »

My only idea was that the cable for the dyno control box is. But how
User avatar
ignitionautosport
Posts: 577
Joined: Wed Jul 27, 2011 5:30 am
ECU Model: S80 Pro
Location: New Zealand
Contact:

Re: DTA E48 Cable with 9 pins and 3 pin connector for what ?

Post by ignitionautosport »

I doubt it is for dyno box. I'd bin it, or use one connector and get a 15pin for the ecu end.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
C20XER
Posts: 8
Joined: Thu Dec 22, 2011 5:14 pm
ECU Model: P8 Pro
Distributor: Private EBAY
Firmware Version: 34
Location: Germany

Re: DTA E48 Cable with 9 pins and 3 pin connector for what ?

Post by C20XER »

ok thanks , the seller told me that he had thing the cable is for the E48. But he don´t know.

A use to conect a usb to serial adapter with 15 pins. it works great :) Only the Timings must you adjust
Post Reply