Hoi Forum,
i had bought twice a DTA E48 . By the ECu is a cable with 9 pine male and female.
And a 3 pin male connector.
But the ECU had only a 15 pin femal conect.
For what is the cable, with cani doing with it ?
Here a little Pic of it
DTA E48 Cable with 9 pins and 3 pin connector for what ?
-
- Posts: 8
- Joined: Thu Dec 22, 2011 5:14 pm
- ECU Model: P8 Pro
- Distributor: Private EBAY
- Firmware Version: 34
- Location: Germany
DTA E48 Cable with 9 pins and 3 pin connector for what ?
Last edited by C20XER on Fri Jul 11, 2014 9:04 am, edited 1 time in total.
Re: DTA E48 Cable with 9 pins and 3 pin connector for what ?
No idea but it can't be used with the DTA! DTA correct cable will have 9 pin PC Serial port connection and 15 pin ECU connection. Other alternative is 9 pin serial to USB adaptor or if laptop has a PCMIA port you could use a Serial PCMIA card!
-
- Posts: 3578
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
-
- Posts: 8
- Joined: Thu Dec 22, 2011 5:14 pm
- ECU Model: P8 Pro
- Distributor: Private EBAY
- Firmware Version: 34
- Location: Germany
Re: DTA E48 Cable with 9 pins and 3 pin connector for what ?
My only idea was that the cable for the dyno control box is. But how
- ignitionautosport
- Posts: 577
- Joined: Wed Jul 27, 2011 5:30 am
- ECU Model: S80 Pro
- Location: New Zealand
- Contact:
Re: DTA E48 Cable with 9 pins and 3 pin connector for what ?
I doubt it is for dyno box. I'd bin it, or use one connector and get a 15pin for the ecu end.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
-
- Posts: 8
- Joined: Thu Dec 22, 2011 5:14 pm
- ECU Model: P8 Pro
- Distributor: Private EBAY
- Firmware Version: 34
- Location: Germany
Re: DTA E48 Cable with 9 pins and 3 pin connector for what ?
ok thanks , the seller told me that he had thing the cable is for the E48. But he don´t know.
A use to conect a usb to serial adapter with 15 pins. it works great Only the Timings must you adjust
A use to conect a usb to serial adapter with 15 pins. it works great Only the Timings must you adjust