older vesion firmware for S40
older vesion firmware for S40
Hi
im in need of the older version firmware for an S40PRO ECU to downgrade it to the original version.
as i searched in i could not found it
the version which im looking for is : 66.02
you are asking why ?
ok , let me tell you
i bought the ecu and it has a password
i upgraded the ecu to 75.01 , now im not able to use the master code 2679
so , im gonna downgrade the software to the original which is lower than 68 to make me able to use the magic code...
any suggestion would be helpful
yours , Ali
im in need of the older version firmware for an S40PRO ECU to downgrade it to the original version.
as i searched in i could not found it
the version which im looking for is : 66.02
you are asking why ?
ok , let me tell you
i bought the ecu and it has a password
i upgraded the ecu to 75.01 , now im not able to use the master code 2679
so , im gonna downgrade the software to the original which is lower than 68 to make me able to use the magic code...
any suggestion would be helpful
yours , Ali
Re: older vesion firmware for S40
It is the PC Software you need to be lower than 66.02 no the ECU firmware.
I think you will need to return it to DTA for unlocking.
I think you will need to return it to DTA for unlocking.
Re: older vesion firmware for S40
oh my god,
we live in middle east , shipment cost and custom duty is insane in here.
is there any other way to unlock or reset these ECUs
there are four of them
we live in middle east , shipment cost and custom duty is insane in here.
is there any other way to unlock or reset these ECUs
there are four of them
- ignitionautosport
- Posts: 577
- Joined: Wed Jul 27, 2011 5:30 am
- ECU Model: S80 Pro
- Location: New Zealand
- Contact:
Re: older vesion firmware for S40
I have firmware and PC software here, if that helps: http://www.ignitionautosport.co.nz/prod ... management.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
-
- Posts: 3577
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: older vesion firmware for S40
Or start
0000
0001
0002
0003
you get the idea.
0000
0001
0002
0003
you get the idea.
Re: older vesion firmware for S40
thank you so much
i wish it would help along with master code of 2769
i wish it would help along with master code of 2769
Re: older vesion firmware for S40
I'll make a small program to unlock the new DTA series, but I guess Alan won't like that idea.eng_zahir wrote:oh my god,
we live in middle east , shipment cost and custom duty is insane in here.
is there any other way to unlock or reset these ECUs
there are four of them
If I find some time next week, I'll start with it, should not take that long.
Re: older vesion firmware for S40
why Allan would not like such a software !
im sure that he understand situation like mine , i have to spend about 1000 or more pounds to send these ECUs and get them unlock ....
i am against a master code by myself but he may make a key generator using hardware version and/or serial number ... to make it easy to unlock these ecus (not removing the lock option )
by the way.... thank you all
looking forward for good news on the MACRO
..
im sure that he understand situation like mine , i have to spend about 1000 or more pounds to send these ECUs and get them unlock ....
i am against a master code by myself but he may make a key generator using hardware version and/or serial number ... to make it easy to unlock these ecus (not removing the lock option )
by the way.... thank you all
looking forward for good news on the MACRO
..
Re: older vesion firmware for S40
That is not the correct master pin number anyway.eng_zahir wrote:thank you so much
i wish it would help along with master code of 2769
Re: older vesion firmware for S40
its 2679
isnt it ?