older vesion firmware for S40

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
eng_zahir
Posts: 6
Joined: Fri Nov 29, 2013 12:32 pm
ECU Model: S80 Pro
Firmware Version: 56

older vesion firmware for S40

Post by eng_zahir »

Hi
im in need of the older version firmware for an S40PRO ECU to downgrade it to the original version.
as i searched in i could not found it
the version which im looking for is : 66.02

you are asking why ?
ok , let me tell you
i bought the ecu and it has a password
i upgraded the ecu to 75.01 , now im not able to use the master code 2679
so , im gonna downgrade the software to the original which is lower than 68 to make me able to use the magic code...

any suggestion would be helpful

yours , Ali
Antral
Posts: 194
Joined: Mon Aug 01, 2011 8:20 am

Re: older vesion firmware for S40

Post by Antral »

It is the PC Software you need to be lower than 66.02 no the ECU firmware.
I think you will need to return it to DTA for unlocking.
eng_zahir
Posts: 6
Joined: Fri Nov 29, 2013 12:32 pm
ECU Model: S80 Pro
Firmware Version: 56

Re: older vesion firmware for S40

Post by eng_zahir »

oh my god,
we live in middle east , shipment cost and custom duty is insane in here.

is there any other way to unlock or reset these ECUs
there are four of them
:cry: :cry: :cry:
User avatar
ignitionautosport
Posts: 577
Joined: Wed Jul 27, 2011 5:30 am
ECU Model: S80 Pro
Location: New Zealand
Contact:

Re: older vesion firmware for S40

Post by ignitionautosport »

I have firmware and PC software here, if that helps: http://www.ignitionautosport.co.nz/prod ... management.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: older vesion firmware for S40

Post by stevieturbo »

Or start

0000

0001
0002
0003


you get the idea.
eng_zahir
Posts: 6
Joined: Fri Nov 29, 2013 12:32 pm
ECU Model: S80 Pro
Firmware Version: 56

Re: older vesion firmware for S40

Post by eng_zahir »

thank you so much
i wish it would help along with master code of 2769

:mrgreen: :mrgreen: :mrgreen:
MarcoV6T
Posts: 101
Joined: Tue Jul 26, 2011 12:20 pm
ECU Model: S80 Pro
Firmware Version: 58

Re: older vesion firmware for S40

Post by MarcoV6T »

eng_zahir wrote:oh my god,
we live in middle east , shipment cost and custom duty is insane in here.

is there any other way to unlock or reset these ECUs
there are four of them
:cry: :cry: :cry:
I'll make a small program to unlock the new DTA series, but I guess Alan won't like that idea.

If I find some time next week, I'll start with it, should not take that long.
eng_zahir
Posts: 6
Joined: Fri Nov 29, 2013 12:32 pm
ECU Model: S80 Pro
Firmware Version: 56

Re: older vesion firmware for S40

Post by eng_zahir »

why Allan would not like such a software !
im sure that he understand situation like mine , i have to spend about 1000 or more pounds to send these ECUs and get them unlock ....
i am against a master code by myself but he may make a key generator using hardware version and/or serial number ... to make it easy to unlock these ecus (not removing the lock option )
by the way.... thank you all
looking forward for good news on the MACRO
.. :D :D
Antral
Posts: 194
Joined: Mon Aug 01, 2011 8:20 am

Re: older vesion firmware for S40

Post by Antral »

eng_zahir wrote:thank you so much
i wish it would help along with master code of 2769

:mrgreen: :mrgreen: :mrgreen:
That is not the correct master pin number anyway. ;)
eng_zahir
Posts: 6
Joined: Fri Nov 29, 2013 12:32 pm
ECU Model: S80 Pro
Firmware Version: 56

Re: older vesion firmware for S40

Post by eng_zahir »

:lol: :lol: :lol: :lol: :lol:
its 2679
isnt it ?
;) ;) ;)
Post Reply