Gdash connection to DTA S80

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
Post Reply
OlivierDE
Posts: 3
Joined: Wed Apr 15, 2015 4:07 pm
ECU Model: S80 Pro

Gdash connection to DTA S80

Post by OlivierDE »

Hello,

I want to update my P8 ECU with a S80 ECU.
But i still have my old gdash dashboard.
Is it possible to connect this?
Anyone tried this before?
I 've already tried it with RS232 network but that didnt work. (maybe wrong settings)
At the pinout I see there are two CAN connection. (pin 8 and 16)

Regards,

Olivier
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Gdash connection to DTA S80

Post by stevieturbo »

I'd have thought it should work ok ?

Have you the dash RS232 data stream turned on on the software ?

Are you saying you want to use an S80, or you already have tried an S80 ? the post is unclear.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Gdash connection to DTA S80

Post by Alex DTA »

GDash baud rate is 9600, S80 is 57600, so they won't work.
OlivierDE
Posts: 3
Joined: Wed Apr 15, 2015 4:07 pm
ECU Model: S80 Pro

Re: Gdash connection to DTA S80

Post by OlivierDE »

sparrow wrote:GDash baud rate is 9600, S80 is 57600, so they won't work.
Ok thank you for your response
landychris
Posts: 17
Joined: Fri Aug 12, 2011 5:19 am
ECU Model: S80 Pro
Firmware Version: 54
Location: Gloucestershire
Contact:

Re: Gdash connection to DTA S80

Post by landychris »

Bit late to the party but back in 2009 Allan emailed me saying that the GDash would work with my S80 with the latest GDash firmware.

Never got around to trying it but he did say it could be done
ptsironis
Posts: 8
Joined: Sat Apr 09, 2016 9:09 am
ECU Model: S40 Pro
Firmware Version: 47

Re: Gdash connection to DTA S80

Post by ptsironis »

i have an S40pro, (with old firmware v47) and a Gdash from 2009 installed.
Gdash needs to run latest firmware (if i remember correctly its v17, and is available from DTA), then settings on the software to use rs232 stream etc. It works fine (alan advice us then to do it that way)
FIAT Punto HGT SC
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Gdash connection to DTA S80

Post by Alex DTA »

Thanks for clarifying.
Post Reply